Services
Six services. Stack any combination.
Order each independently or stack as turnkey. Same engineers, same project memory, one invoice.
01
PCB Fabrication
Prototype to small-batch FR-4 / aluminum / flex / Rogers boards.
Open PCB Fabrication- 1 to 20 layers — green / red / yellow / blue / black / matte
- HASL, ENIG, OSP, Hard Gold, Imm-Tin, Imm-Silver
- Castellated holes, edge plating, impedance control, gold fingers
- Flying probe testing on every board (+ 4-wire Kelvin if needed)
- 72-hour standard turnaround. Bengaluru pickup.
- With or without frame (380×280 to 736×736 mm)
- 0.10 / 0.12 / 0.15 / 0.20 mm foil thickness
- Half-etched fiducial marks for SMT line vision pickup
- Optional electropolishing for fine-pitch QFN / BGA
- Auto-extracted paste layers from your Gerber zip
- Auto-detects KiCad / Altium / EasyEDA / custom BOM formats
- Classifies SMD vs THT, counts solder joints per package
- Pick-and-place file → top/bottom side breakdown
- India-first sourcing matrix to dodge international shipping
- Lifecycle / NRND / EOL flags so you don't spec dead parts
- SAC305 lead-free or Sn63/Pb37 leaded paste
- Standard / expedite / rush turnarounds
- Conformal coating (acrylic, urethane, silicone)
- In-circuit and functional test, X-ray inspection for BGA
- Per-board joint count drives the quote — no padding
- Schematic + BOM + Gerber audit
- Blocker / High / Medium / Low findings report
- IPC-2221B clearance, regulator FB math, antenna keep-out
- AC-under-MCU and isolation slot detection for mains designs
- 24-hour turnaround on first review
- Requirement freeze — what success looks like
- Architecture pick (MCU / radio / power / sensors)
- Component selection with India-stock alternates
- Compliance plan (BIS / CE / FCC / RoHS)
- Phase-gated schedule — no surprises in week 12
Want all six on one project?
Turnkey customers get a dedicated engineer, faster turnarounds, and ~30% off compared to ordering each service à la carte.